Lane Aluminum · Industrial Aluminium Supply and Export
COIL and SLIT STRIP · CIRCLES and OVALS · FOIL · TREAD PLATE

Mill-Direct Aluminium Rolling, Slitting, Blanking Global Export

We supply core aluminium product lines with sample-confirmed finishes and order-specific tolerances:

  • •Aluminium Coil and Slit Strip: Master coils, slit strip down to 10 mm, max width up to 2,500 mm
  • •Aluminium Circles and Ovals: 0.3–6.0 mm, Ø80–1,600 mm, round, oval and colour coated
  • •Aluminium Foil: 0.006–0.20 mm household, container, shisha, battery and coated rolls
  • •Aluminium Tread Plate: 0.6–6.0 mm, 200–1,530 mm, rib and embossed patterns
Aluminium Master Coil
Round Aluminium Circles
Aluminium Foil Jumbo Rolls
Big Five Bar Aluminium Tread Plate

Specifications

Explore dedicated specification pages across our core product lines.

View All 19 Products →
Cookware and Holloware Coil 0.3-6.0 mm · 80-1,600 mm · To 7 t
Aluminium Coil and Slit Strip

Cookware and Holloware Coil

Soft, high-ductility coil for circle blanking, multi-stage deep drawing and spinning; 3003-O where dent resistance after pressing is required.

View Specifications →
Lighting, Anodising and Enamel (4006) Coil 0.2-8.0 mm · 80-1,600 mm · 4006 Enamel
Aluminium Coil and Slit Strip

Lighting, Anodising and Enamel (4006) Coil

Bright-rolled and specular coil for lamp shades and reflectors, plus controlled-grain coil for anodising and 4006 for vitreous enamelling.

View Specifications →
Insulation, Roofing and Cladding Coil (Max Width up to 2,500 mm) 0.3-3.0 mm · Max Width up to 2,500 mm
Aluminium Coil and Slit Strip

Insulation, Roofing and Cladding Coil (Max Width up to 2,500 mm)

Strain-hardened coil for duct wrap, roof panels, cladding and flashing where stiffness, flatness and weathering matter.

View Specifications →
Slit Strip and Narrow Coil 0.1-3.0 mm · 10-600 mm Wide
Aluminium Coil and Slit Strip

Slit Strip and Narrow Coil

Slit strip down to 10 mm for transformer winding, cable wrap, composite-pipe and blinds with controlled burr and camber.

View Specifications →
Round Aluminium Circles (Cookware and Pressing) 0.3-6.0 mm · Ø80-1,600 mm
Aluminium Circles and Ovals

Round Aluminium Circles (Cookware and Pressing)

Soft to hard (all tempers) round blanks for pressing, deep drawing and spinning pots, pans and lids; 5052 for coastal use.

View Specifications →
Lighting Circles (Reflectors and Lamp Shades) 0.3-6.0 mm · Ø80-1,600 mm
Aluminium Circles and Ovals

Lighting Circles (Reflectors and Lamp Shades)

Round blanks for lamp shades and reflectors formed by spinning or pressing, with bright, polished or anodised appearance agreed against sample.

View Specifications →
Oval Aluminium Blanks (Cut to A / B Axes Drawing) Custom A / B Axes Drawing
Aluminium Circles and Ovals

Oval Aluminium Blanks (Cut to A / B Axes Drawing)

Non-round blanks cut to the A and B axes on your approved drawing for oval cookware, roasters and pans.

View Specifications →
Colour Coated Aluminium Circles Colour Matched to Sample
Aluminium Circles and Ovals

Colour Coated Aluminium Circles

Round blanks with colour coating matched to an approved sample for pre-painted cookware, lids and decorative discs.

View Specifications →

How to Order

From your initial specification request to export shipment.

Send your request

Send us the pattern/shape/finish, alloy, temper, thickness, width or diameter, and quantity.

We confirm the specification

You approve the surface, blank drawing, tolerances, or coil build before we roll, blank, or slit.

We roll, blank and check

Each coil or batch is checked against the approved sample and the signed order specification.

We pack and ship

Paper-interleaved, wrapped, cored, edge-protected, and export-packed on pallets or in cases.

Order Specification Checklist for Quotation

Product Line Required Dimensions and Alloy Core ID, Surface and Packing
Aluminium Coil and Slit Strip Alloy, temper, forming process, thickness, width (max width up to 2,500 mm, slit 10–600 mm) and tolerances Core ID (405/505/508 or 76/152 mm), max OD, coil weight, surface/edge condition, quantity and port
Aluminium Circles and Ovals Shape (round or oval with A/B axis drawing), alloy (1050/1060/1070/1100/3003/5052), temper, thickness and diameter Plain mill finish, lighting finish or colour coated (sample match), stacks or interleaved pallets, quantity and port
Aluminium Foil Alloy and temper (1235/8011/8079/1060/1100/3003/3102), thickness, width and application (household, container, shisha, battery, coated) Jumbo rolls, narrow slit rolls (with core ID) or pre-cut sheets/discs, plain or sample-matched coating, quantity and port
Aluminium Tread Plate Pattern name or photo, alloy (1050/1060/1100/3003/5052/5754), base thickness and width (200–1,530 mm) Coil, strip or cut sheet, one-face or two-face, mill/bright/anodised/coated finish, measurement basis and port